I-SYS

R5.0v1 Weigh Bridge PCB


R5.0v1 Weigh Bridge PCB

Specifications

Continuous or Request mode Selectable.
Baud Rate 2400bps or 9600bps selectable.
Parity None, Even, Odd.
Hardware flow None

Serial Communication: A 10 pin FRC box header with TTL UART Pins are available for serial communication. RS232 adaptor PCBs as shown below are available for easy interface for connecting to a PC.

The communication settings are as follow :

  • Data length: 8 data bit no parity one stop bit, 7 data bit odd parity one stop bit, 7 data bit even parity one stop bit.
  • For customized string format, please contact manufacturer. Optically isolated RS232 /485
  • interface PCBs are also available with us.
  • The data string will be a continuous dump data or transmit on request. The data rate is 10 data strings per second for continuous dump.


LED Display: 6 digit Common anode seven segment display. A 16pin FRC box connector is provided on the PCB for this purpose. Apart from segment (weight) display it will also drive a LED that indicates the presence of mains supply. Buzzer annunciation: The buzzer is used for multiple annunciations. A few are mentioned below :

  • Beeps with scrolling banner display.
  • Beeps while TARE key is pressed.
  • Intermittent & continuous beeps for set-point1 & set-point2 function.

Yes! I am interested






Looking for "R5.0v1 Weigh Bridge PCB" ?